The Replacement PSP Screen--How to?

If you accidentally drop your PSP on the floor, and your screen is broken down, it is certain that you have to do the replacement PSP screen. Generally speaking, we will ask for the professional people to do the replacement PSP screen for the sake of good playing effect. However, if you think it is too expensive or it is wasting your time, I will teach you how to do the replacement PSP screen.

 

The necessary tools that you do the replacement PSP screen are that one PSP which is required to replace the screen, one replaced screen and one suitable screwdriver. And the replacement PSP screen is thus started. First of all you should dismantle PSP with screwdriver, and all the screws around the PSP have to be taken down. After finishing those screws, you can take the motherboard off PSP. 

There is one thing you have to keep in mind, that is, to keep those screws in the box, so that it is easy for you to find those screws when you are installing the PSP. The next you have to do is to dismantle the button cables under the screen, you just tilt the button cables out of the board. Those cables are the ones to control the home, start buttons and others. After that, you have to tilt all the buckles around the screen, and you should tilt the buckle one by one so as to avoid furthering damaging the screen.

 

Now, it is time to take out the screen, so you should take your time to do the next steps. There are two cables connecting the screen with the motherboard, so you should tilt the dark-color buckle up and get the cables out, and finally, the screen is perfectly taken off. But don't rash and you have to take the backlight board out of the screen. What you should do is to carefully tilt the backlight board off the screen. 

 

Once the screen is wholly separated from the backlight board, you can install the new screen on PSP. Before replacing the new screen, you have to take off the protective film on the back of the screen. When you reinstall the new screen, you should press the buckles under the screen, and then install the buttons back. The final step is to put the case on the PSP. And now, the replacement PSP screen is perfectly done.

As a matter of fact, it is not difficult to do the replacement PSP screen. As long as you are careful enough to follow the above rules, you can do well the replacement PSP screen.

If you need a screen replacement for the PSP 1000 series, then this is the one to get. It's cheaper than I thought it was going to be, and it is a good quality product. IF THIS IS YOUR FIRST TIME replacing a PSP screen, look up a tutorial/video online. It will help you and your PSP a lot with the installation. Also, most people don't have the screwdriver needed, so get that as well. It's less than $3 and is under the picture in the section labeled "frequently bought with."